Brons-fitwerk
- Alle messingAlles aus MessingAll brass
- KogelkranenKugelhähneBall valves
- Kleppen & beluchtingVentile & BelüftungValves & venting
- Huiddoorvoeren & aardingBorddurchlässe & ErdungSkin fittings & grounding
- Slangpilaren & -verbindersSchlauchtüllen & -verbinderHose tails & connectors
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Koppelingen, moeren & doppenKupplungen, Muttern & KappenCouplings, nuts & caps
- GEKAGEKAGEKA
- Alle CR-fitwerkAlle CR-FittingsAll CR fittings
- KogelkranenKugelhähneBall valves
- Huiddoorvoeren & scheproostersBorddurchlässe & AnsaugsiebeSkin fittings & scoop strainers
- SlangpilarenSchlauchtüllenHose tails
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Koppelingen, moeren & doppenKupplungen, Muttern & KappenCouplings, nuts & caps
- Alle brons-fitwerkAlle Bronze-FittingsAll bronze fittings
- KogelkranenKugelhähneBall valves
- HuiddoorvoerenBorddurchlässeSkin fittings
- SlangpilarenSchlauchtüllenHose tails
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Moeren, doppen & pluggenMuttern, Kappen & StopfenNuts, caps & plugs
- Alle PP-fitwerkAlle PP-FittingsAll PP fittings
- KogelkranenKugelhähneBall valves
- Huiddoorvoeren & tankadaptersBorddurchlässe & TankadapterSkin fittings & tank adapters
- SlangpilarenSchlauchtüllenHose tails
- Bochten, T-stukken & koppelingenWinkel, T-Stücke & VerbinderElbows, tees & connectors
- Nippels & verloopNippel & ReduzierstückeNipples & reducers
- TypeTypType
- Alle montagesnoerenAlle AderleitungenAll single-core wires
- Montagesnoer H07Aderleitung H07Single-core wire H07
- FLRY-B
- Solar kabelSolarkabelSolar cable
- DoorsnedeQuerschnittCross-section
- 0,5 mm²
- 0,75 mm²
- 1 mm²
- 1,5 mm²
- 2 mm²
- 2,5 mm²
- 4 mm²
- 6 mm²
- 10 mm²
- 16 – 120 mm²
- DoorsnedeQuerschnittCross-section
- Alle accukabelsAlle BatteriekabelAll battery cables
- 0,5 – 2,5 mm²
- 4 – 10 mm²
- 16 – 35 mm²
- 50 – 120 mm²
- TypeTypType
- Alle meeraderige kabelsAlle mehradrigen KabelAll multi-core cables
- HalogeenvrijHalogenfreiHalogen-free
- Multi core
- Platte kabelFlachkabelFlat cable
- StuurstroomkabelSteuerleitungControl cable
- WalstroomkabelLandstromkabelShore power cable
- Aantal adersAderzahlCores
- 2-aderig2-adrig2-core
- 3-aderig3-adrig3-core
- 4-aderig4-adrig4-core
- 5-aderig en meer5-adrig und mehr5 cores and more
- Type klemSchellentypClamp type
- Alle klemmenAlle SchellenAll clamps
- WormschroefklemmenSchneckengewindeschellenWorm drive clamps
- Zware klemmen & superstrengthSchwere Schellen & SuperstrengthHeavy duty & superstrength
- MiniklemmenMini-SchellenMini clamps
- LeidingklemmenRohrschellenPipe clamps
- KlembereikKlemmbereichClamp range
- tot 12 mmbis 12 mmup to 12 mm
- 12 – 20 mm
- 20 – 32 mm
- 32 – 50 mm
- 50 – 80 mm
- 80 – 120 mm
- groter dan 120 mmüber 120 mmover 120 mm
Bronze fittings for applications on board
Bronze fittings are used for pipework on board, such as skin fittings, ball valves and hose connections. Bronze is a copper-tin alloy that is corrosion-resistant in seawater. DG Rubber Holland supplies bronze ball valves, skin fittings, hose tails, elbows, tees and nipples, from 1/8" up to and including 6". You choose by type of fitting, size and thread type.
Why bronze on board
In seawater, ordinary brass can dezincify, which makes it porous. Bronze is corrosion-resistant in seawater and therefore a common choice for pipes carrying seawater. Over time, bronze can form a green patina. This does not affect the strength or tightness of the fitting. An alternative to bronze is CR fittings made of dezincification-resistant brass.
Types of bronze fittings
- Ball valves: with bronze ball, also in complete versions with lever and lock.
- Skin fittings: for the passage through the hull, also with strainer.
- Hose tails: with male thread, for connecting hose.
- Elbows: 90 degrees Bi-Bu and Bi-Bi, and 45 degrees Bi-Bu.
- Tees, sockets, hex nipples and reducing bushes: to connect, branch or change the size of pipes.
- Caps and square plugs: to close off a connection.
Determining the size and combining
Bronze fittings are available in sizes from 1/8" up to and including 6" and, for hose connections, from 5 up to and including 127 mm. Bi stands for female (internal) thread and Bu for male (external) thread. You determine the thread size by measuring the diameter of the thread with a caliper. Working pressures and dimensions of each fitting are listed in the specifications of each item.
For cooling water on board, bronze fittings are often combined with a cooling water filter. Choose the hose under hoses and secure the connection with hose clamps in W5 stainless steel.
Frequently asked questions about bronze fittings
- Should I choose bronze or brass for salt water?
- For salt water, DG Rubber Holland recommends bronze or dezincification-resistant brass (CR). Ordinary brass can dezincify in seawater. Read more in the blog differences in fittings.
- What do Bi and Bu mean?
- Bi stands for female (internal) thread and Bu for male (external) thread. A Bi-Bu elbow therefore has a female thread on one side and a male thread on the other.
Not sure which fitting you need? Contact us for technical advice.
Cable calculator
Which cable size do I need?
Enter voltage, current and length and instantly see the right battery cable and cable lugs.
Rubber profiles
From stock or made to measure
Can't find your profile? Then we'll have it made. Through our sister company DG Rubber Profiles we also supply custom profiles, made to your drawing or sample.
Standard profiles at DG Rubber Holland
- Window rubber, sponge rubber, cellular rubber, self-gripping profiles and bumper strips
- Ordered before 14:00, usually delivered the next working day
- Order online straight away at your own prices
Custom work through DG Rubber Profiles
- Profile to your drawing, sample or idea
- Over 4400 dies, own production in the Netherlands
- In TPE, EPDM or silicone, in small and large series
- 1Drawing or sample
- 2Advice and quote
- 3Production and delivery
Need advice for your project?
Contact our technical experts. In urgent cases we will help you as quickly as possible.




