Messing
- Alle messingAlles aus MessingAll brass
- KogelkranenKugelhähneBall valves
- Kleppen & beluchtingVentile & BelüftungValves & venting
- Huiddoorvoeren & aardingBorddurchlässe & ErdungSkin fittings & grounding
- Slangpilaren & -verbindersSchlauchtüllen & -verbinderHose tails & connectors
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Koppelingen, moeren & doppenKupplungen, Muttern & KappenCouplings, nuts & caps
- GEKAGEKAGEKA
- Alle CR-fitwerkAlle CR-FittingsAll CR fittings
- KogelkranenKugelhähneBall valves
- Huiddoorvoeren & scheproostersBorddurchlässe & AnsaugsiebeSkin fittings & scoop strainers
- SlangpilarenSchlauchtüllenHose tails
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Koppelingen, moeren & doppenKupplungen, Muttern & KappenCouplings, nuts & caps
- Alle brons-fitwerkAlle Bronze-FittingsAll bronze fittings
- KogelkranenKugelhähneBall valves
- HuiddoorvoerenBorddurchlässeSkin fittings
- SlangpilarenSchlauchtüllenHose tails
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Moeren, doppen & pluggenMuttern, Kappen & StopfenNuts, caps & plugs
- Alle PP-fitwerkAlle PP-FittingsAll PP fittings
- KogelkranenKugelhähneBall valves
- Huiddoorvoeren & tankadaptersBorddurchlässe & TankadapterSkin fittings & tank adapters
- SlangpilarenSchlauchtüllenHose tails
- Bochten, T-stukken & koppelingenWinkel, T-Stücke & VerbinderElbows, tees & connectors
- Nippels & verloopNippel & ReduzierstückeNipples & reducers
- TypeTypType
- Alle montagesnoerenAlle AderleitungenAll single-core wires
- Montagesnoer H07Aderleitung H07Single-core wire H07
- FLRY-B
- Solar kabelSolarkabelSolar cable
- DoorsnedeQuerschnittCross-section
- 0,5 mm²
- 0,75 mm²
- 1 mm²
- 1,5 mm²
- 2 mm²
- 2,5 mm²
- 4 mm²
- 6 mm²
- 10 mm²
- 16 – 120 mm²
- DoorsnedeQuerschnittCross-section
- Alle accukabelsAlle BatteriekabelAll battery cables
- 0,5 – 2,5 mm²
- 4 – 10 mm²
- 16 – 35 mm²
- 50 – 120 mm²
- TypeTypType
- Alle meeraderige kabelsAlle mehradrigen KabelAll multi-core cables
- HalogeenvrijHalogenfreiHalogen-free
- Multi core
- Platte kabelFlachkabelFlat cable
- StuurstroomkabelSteuerleitungControl cable
- WalstroomkabelLandstromkabelShore power cable
- Aantal adersAderzahlCores
- 2-aderig2-adrig2-core
- 3-aderig3-adrig3-core
- 4-aderig4-adrig4-core
- 5-aderig en meer5-adrig und mehr5 cores and more
- Type klemSchellentypClamp type
- Alle klemmenAlle SchellenAll clamps
- WormschroefklemmenSchneckengewindeschellenWorm drive clamps
- Zware klemmen & superstrengthSchwere Schellen & SuperstrengthHeavy duty & superstrength
- MiniklemmenMini-SchellenMini clamps
- LeidingklemmenRohrschellenPipe clamps
- KlembereikKlemmbereichClamp range
- tot 12 mmbis 12 mmup to 12 mm
- 12 – 20 mm
- 20 – 32 mm
- 32 – 50 mm
- 50 – 80 mm
- 80 – 120 mm
- groter dan 120 mmüber 120 mmover 120 mm
Brass fittings, ball valves and hose tails
Brass fittings connect, distribute and shut off pipes and hoses in installations for water, air and other media. DG Rubber Holland supplies brass ball valves, check valves, air vents, hose tails, couplings, elbows, tees, nipples and reducers, from 1/8" up to and including 3". You choose brass fittings by type, thread type, size and application.
Brass fittings in our range
- Ball valves: including 3-way ball valves with T-port.
- Valves and venting: check valves and air vents.
- Skin fittings and earthing.
- Hose tails and hose couplings: for connecting hose.
- Elbows and tees: including 90 degrees Bi-Bu.
- Nipples, sockets and reducers.
- Couplings, union nuts and caps.
Depending on the item, the brass is nickel-plated or chrome-plated, or the fitting has a PTFE seal or a stainless steel spring. The temperature range differs per item and lies between -30 °C and +200 °C.
Application: fresh water and salt water
Brass is a copper-zinc alloy and is common in fresh water. In seawater, zinc can dissolve out of the brass. This is called dezincification and makes the metal porous and weaker. DG Rubber Holland therefore does not recommend ordinary brass for salt water. For seawater, choose CR fittings made of dezincification-resistant brass or bronze fittings.
Choosing by thread and size
Filter by thread type, thread size and female or male thread. Bi stands for female (internal) thread and Bu for male (external) thread. Measure the diameter of the thread with a caliper to determine the inch size. For hose connections, sizes run from 6 up to and including 76 mm. Brass fittings are used, among other things, to connect sanitation hoses. For gas pipes, there are separate gas fittings. Read more about the choice of material in the blog differences in fittings.
Frequently asked questions about brass fittings
- Can I use brass in salt water?
- DG Rubber Holland does not recommend ordinary brass for salt water, because it can dezincify in seawater. Use CR fittings or bronze there.
- What is dezincification?
- In dezincification, the zinc in the brass alloy dissolves in seawater. As a result, the metal becomes porous and loses strength.
- What is a 3-way ball valve with T-port?
- A 3-way ball valve has three connections. Via the T-shaped bore in the ball, you distribute or select the flow between the connections. The possible positions are shown for each item.
Not sure which fitting you need? Contact us for technical advice.
Cable calculator
Which cable size do I need?
Enter voltage, current and length and instantly see the right battery cable and cable lugs.
Rubber profiles
From stock or made to measure
Can't find your profile? Then we'll have it made. Through our sister company DG Rubber Profiles we also supply custom profiles, made to your drawing or sample.
Standard profiles at DG Rubber Holland
- Window rubber, sponge rubber, cellular rubber, self-gripping profiles and bumper strips
- Ordered before 14:00, usually delivered the next working day
- Order online straight away at your own prices
Custom work through DG Rubber Profiles
- Profile to your drawing, sample or idea
- Over 4400 dies, own production in the Netherlands
- In TPE, EPDM or silicone, in small and large series
- 1Drawing or sample
- 2Advice and quote
- 3Production and delivery
Need advice for your project?
Contact our technical experts. In urgent cases we will help you as quickly as possible.



