Accukabels
- Alle messingAlles aus MessingAll brass
- KogelkranenKugelhähneBall valves
- Kleppen & beluchtingVentile & BelüftungValves & venting
- Huiddoorvoeren & aardingBorddurchlässe & ErdungSkin fittings & grounding
- Slangpilaren & -verbindersSchlauchtüllen & -verbinderHose tails & connectors
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Koppelingen, moeren & doppenKupplungen, Muttern & KappenCouplings, nuts & caps
- GEKAGEKAGEKA
- Alle CR-fitwerkAlle CR-FittingsAll CR fittings
- KogelkranenKugelhähneBall valves
- Huiddoorvoeren & scheproostersBorddurchlässe & AnsaugsiebeSkin fittings & scoop strainers
- SlangpilarenSchlauchtüllenHose tails
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Koppelingen, moeren & doppenKupplungen, Muttern & KappenCouplings, nuts & caps
- Alle brons-fitwerkAlle Bronze-FittingsAll bronze fittings
- KogelkranenKugelhähneBall valves
- HuiddoorvoerenBorddurchlässeSkin fittings
- SlangpilarenSchlauchtüllenHose tails
- Bochten & T-stukkenWinkel & T-StückeElbows & tees
- Nippels, sokken & verloopNippel, Muffen & ReduzierstückeNipples, sockets & reducers
- Moeren, doppen & pluggenMuttern, Kappen & StopfenNuts, caps & plugs
- Alle PP-fitwerkAlle PP-FittingsAll PP fittings
- KogelkranenKugelhähneBall valves
- Huiddoorvoeren & tankadaptersBorddurchlässe & TankadapterSkin fittings & tank adapters
- SlangpilarenSchlauchtüllenHose tails
- Bochten, T-stukken & koppelingenWinkel, T-Stücke & VerbinderElbows, tees & connectors
- Nippels & verloopNippel & ReduzierstückeNipples & reducers
- TypeTypType
- Alle montagesnoerenAlle AderleitungenAll single-core wires
- Montagesnoer H07Aderleitung H07Single-core wire H07
- FLRY-B
- Solar kabelSolarkabelSolar cable
- DoorsnedeQuerschnittCross-section
- 0,5 mm²
- 0,75 mm²
- 1 mm²
- 1,5 mm²
- 2 mm²
- 2,5 mm²
- 4 mm²
- 6 mm²
- 10 mm²
- 16 – 120 mm²
- DoorsnedeQuerschnittCross-section
- Alle accukabelsAlle BatteriekabelAll battery cables
- 0,5 – 2,5 mm²
- 4 – 10 mm²
- 16 – 35 mm²
- 50 – 120 mm²
- TypeTypType
- Alle meeraderige kabelsAlle mehradrigen KabelAll multi-core cables
- HalogeenvrijHalogenfreiHalogen-free
- Multi core
- Platte kabelFlachkabelFlat cable
- StuurstroomkabelSteuerleitungControl cable
- WalstroomkabelLandstromkabelShore power cable
- Aantal adersAderzahlCores
- 2-aderig2-adrig2-core
- 3-aderig3-adrig3-core
- 4-aderig4-adrig4-core
- 5-aderig en meer5-adrig und mehr5 cores and more
- Type klemSchellentypClamp type
- Alle klemmenAlle SchellenAll clamps
- WormschroefklemmenSchneckengewindeschellenWorm drive clamps
- Zware klemmen & superstrengthSchwere Schellen & SuperstrengthHeavy duty & superstrength
- MiniklemmenMini-SchellenMini clamps
- LeidingklemmenRohrschellenPipe clamps
- KlembereikKlemmbereichClamp range
- tot 12 mmbis 12 mmup to 12 mm
- 12 – 20 mm
- 20 – 32 mm
- 32 – 50 mm
- 50 – 80 mm
- 80 – 120 mm
- groter dan 120 mmüber 120 mmover 120 mm









Battery cables for boats, vehicles and installations
A battery cable connects the battery to components such as the starter motor, the main battery switch or a distribution point in a DC system. DG Rubber Holland supplies double-insulated battery cable in black, red and orange, two-core Twinflex battery cable and halogen-free tinned cable. You choose the right battery cable by cross-section, version and the environment in which the cable is installed.
Types of battery cable in our range
- Double-insulated battery cable: single-core cable with double insulation of PVC and NBR/PVC and a copper conductor to IEC 60228 class 6. Available in black and red from 10 up to and including 120 mm² and in orange from 10 up to and including 95 mm².
- Twinflex battery cable: two separately insulated cores in red and black, together in a transparent PVC sheath. Cross-sections from 2 x 4 up to and including 2 x 50 mm², 0.6/1 kV.
- Halogen-free tinned cable: red or black, with a tinned copper conductor and halogen-free insulation, in cross-sections from 0.5 up to and including 120 mm². The corresponding certificate can be found under technical manuals and certificates.
Temperature range, standards and cable diameter differ per version. You will find them in the specifications of each item and via the filters above the product overview.
Which cross-section do you need?
The required cross-section depends on three factors: the current flowing through the cable, the total cable length (out and back) and the voltage drop you allow. A higher current or a longer cable requires a larger cross-section. In the cable calculator you enter voltage, current and length and receive a recommendation for cable and cable lug.
Class 6 is the finest conductor class according to IEC 60228. The copper core consists of many thin strands. This makes the cable flexible, easy to route in tight spaces and more resistant to vibration.
Terminating and connecting
For a complete connection, combine the battery cable with cable lugs to DIN 40500 and DIN 46235 and battery terminals for positive and negative. With heat shrink tubing with or without adhesive lining you insulate and seal the transition between cable and cable lug. Where the cable may chafe, protect it with protective sleeving from the cable management range.
Frequently asked questions about battery cables
- What does class 6 mean for a battery cable?
- Class 6 refers to the conductor classification of IEC 60228 and is the finest class. The copper core consists of many thin strands, which makes the cable very flexible. That makes it easy to work with in engine compartments, cabinets and other tight spaces.
- What is the difference between single-core battery cable and Twinflex?
- A single-core battery cable has one conductor and is routed separately for each pole. Twinflex has two separately insulated cores, red and black, in one additional PVC sheath. Positive and negative then run together in one cable.
- How do I determine the right cable size?
- Start from the current, the total length out and back and the permissible voltage drop. The cable calculator does the calculation for you. If in doubt, a technical specialist will be happy to help.
You can find more background in the blog battery cables from DG. Not sure which version is right for you? Contact us for technical advice in Dutch, German or English.
Cable calculator
Which cable size do I need?
Enter voltage, current and length and instantly see the right battery cable and cable lugs.
Rubber profiles
From stock or made to measure
Can't find your profile? Then we'll have it made. Through our sister company DG Rubber Profiles we also supply custom profiles, made to your drawing or sample.
Standard profiles at DG Rubber Holland
- Window rubber, sponge rubber, cellular rubber, self-gripping profiles and bumper strips
- Ordered before 14:00, usually delivered the next working day
- Order online straight away at your own prices
Custom work through DG Rubber Profiles
- Profile to your drawing, sample or idea
- Over 4400 dies, own production in the Netherlands
- In TPE, EPDM or silicone, in small and large series
- 1Drawing or sample
- 2Advice and quote
- 3Production and delivery
Need advice for your project?
Contact our technical experts. In urgent cases we will help you as quickly as possible.
